+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NU 314 ECM: ⌀70 × ⌀150 × 35 mm⌀150⌀7035NU 314 ECM
Fig. 1: NU 314 ECM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 314 ECM

Load: radial high; no axial loadCylindrical roller NU

Bearing SKF NU 314 ECM

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 37 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
35 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
236 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 70 × 150 × 35 from other brands

46 products
Series illustration (not a photo of this item): NU 314 ECM
You are viewingSKF NU 314 ECM

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): NU 314 ENU 314 EECT70 × 150 × 3598 pcs€11.56Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 70 × 150 × 35 mmNJ 314different designCT70 × 150 × 3526 pcs€13.25Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU314EME, MCT70 × 150 × 3520 pcs€14.82Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 70 × 150 × 35 mmNJ314J PQJ, PQ: not decodedNTE70 × 150 × 3510 pcs€20.72Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU314J PQJ, PQ: not decodedNTE70 × 150 × 356 pcs€20.72Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 70 × 150 × 35 mmN 314different designCT70 × 150 × 35available to order€12.79Request a quote
  • Photo: NJ 314NJ 314different designUTL70 × 150 × 35available to order€74.03Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU314 MPA P63precision class P6, MPA, 3: not decodedCT70 × 150 × 35available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU314EM C3clearance C3, E, MCT70 × 150 × 35available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NUP314ENUP314EECT70 × 150 × 35available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 70 × 150 × 35mm
Cdynamic 236kN

Cylindrical roller NU bearing NU 314 ECM.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 314 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet