+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NU314EM: ⌀70 × ⌀150 × 35 mm⌀150⌀7035NU314EM
Fig. 1: NU314EM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU314EM

Load: radial high; no axial loadCylindrical roller NU

Bearing CT NU314EM

€14.82per piece
In stock: 20 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
3 exact, 35 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
35 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 70 × 150 × 35 from other brands

46 products
Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mm
You are viewingCT NU314EM
€14.82baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU314EMThis bearingCT70 × 150 × 3520 pcs€14.82you are here
  • Series illustration (not a photo of this item): NU 314 ENU 314 ECT70 × 150 × 3598 pcs€11.56−€3.26Request a quote
  • Series illustration (not a photo of this item): NU 314 ENU 314 Eno brand70 × 150 × 35available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€14.82).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 70 × 150 × 35mm

Cylindrical roller NU bearing NU314EM.

Frequently asked questions

Will 314 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet