+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 1212 ETN9: ⌀60 × ⌀110 × 22 mm⌀110⌀60221212 ETN9
Fig. 1: 1212 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1212 ETN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 1212 ETN9

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 11 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
22 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
31.2 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 60 × 110 × 22 from other brands

13 products
Series illustration (not a photo of this item): 1212 ETN9
You are viewingSKF 1212 ETN9

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 12121212standard designCT60 × 110 × 22133 pcs€4.33Request a quote
  • Photo: 12121212standard designZKL60 × 110 × 22available to order€13.03Request a quote
  • Photo: 12121212standard designZ&S60 × 110 × 22available to order€15.19Request a quote
  • Series illustration (not a photo of this item): 12121212standard designno brand60 × 110 × 22available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 60 × 110 × 22 mm1212 KTNTN, 1:12 tapered boreCT60 × 110 × 22available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 60 × 110 × 22 mm1212K+H2121:12 tapered bore, H212: not decodedCT60 × 110 × 22available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1212 K TV1212 K TVTV, 1:12 tapered boreFAG60 × 110 × 22out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 1212 K1212 K1:12 tapered boreGPZ60 × 110 × 22out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 12121212standard designKG60 × 110 × 22available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1212 K1212 K1:12 tapered boreKG60 × 110 × 22available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 110 × 22mm
Cdynamic 31.2kN

Self-aligning ball bearing 1212. Under GOST the same bearing is designated 1212.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1212?

It is the same bearing under GOST 3189-89: 1212 corresponds to the ISO base 1212. Size 60 × 110 × 22 mm, a full equivalent of 1212.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet