+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 1212: ⌀60 × ⌀110 × 22 mm⌀110⌀60221212
Fig. 1: 1212, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1212

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing Z&S 1212

€15.19per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
6 exact, 6 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
22 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.9 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 60 × 110 × 22 from other brands

13 products
Photo: 1212
You are viewingZ&S 1212
€15.19baseline for the price comparison

Everything the number specifies matches: series 12, 60 × 110 × 22 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

Under the price: the difference from the price of this bearing (€15.19).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 110 × 22mm
mweight 0.9kg

Self-aligning ball bearing 1212. Under GOST the same bearing is designated 1212.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1212?

It is the same bearing under GOST 3189-89: 1212 corresponds to the ISO base 1212. Size 60 × 110 × 22 mm, a full equivalent of 1212.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet