+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
GPZ
Drawing of 1212 K: ⌀60 × ⌀110 × 22 mm⌀110⌀60221212 K
Fig. 1: 1212 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1212 K

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing GPZ 1212 K

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
2 exact, 10 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
22 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.31 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 60 × 110 × 22 from other brands

14 products
Series illustration (not a photo of this item): 1212 K
You are viewingGPZ 1212 K

Everything the number specifies matches: series 12, 60 × 110 × 22 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the GPZ catalogue.

  • Series illustration (not a photo of this item): 1212 K1212 KThis bearingGPZ60 × 110 × 22out of stockon requestyou are here
  • Series illustration (not a photo of this item): 1212 K1212 KKG60 × 110 × 22available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 110 × 22mm
mweight 0.31kg

Self-aligning ball bearing 1212 K. Under GOST the same bearing is designated 111212.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 111212?

It is the same bearing under GOST 3189-89: 111212 corresponds to the ISO base 1212 K. Size 60 × 110 × 22 mm, a full equivalent of 1212 K.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet