+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NU 314: ⌀70 × ⌀150 × 35 mm⌀150⌀7035NU 314
Fig. 1: NU 314, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 314

Load: radial high; no axial loadCylindrical roller NU

Bearing NTE NU 314

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
13 exact, 30 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
35 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
236 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
228 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Equivalents

the same size 70 × 150 × 35 from other brands

46 products
Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mm
You are viewingNTE NU 314

Size and design match across the brand catalogues. The codes in the number are read against the NTE catalogue.

  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU 314This bearingNTE70 × 150 × 35available to orderon requestyou are here
  • Series illustration (not a photo of this item): NU 314 ENU 314 ECT70 × 150 × 3598 pcs€11.56Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU314EMCT70 × 150 × 3520 pcs€14.82Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU 314CT70 × 150 × 35available to order€12.90Request a quote
  • Photo: NU 314NU 314URB70 × 150 × 35available to order€34.92Request a quote
  • Photo: NU 314NU 314ZKL70 × 150 × 35available to order€47.27Request a quote
  • Photo: NU 314NU 314FLT70 × 150 × 35available to order€52.54Request a quote
  • Photo: NU 314NU 314UTL70 × 150 × 35available to order€69.77Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU 314 EM1FAG70 × 150 × 35available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU 314KG70 × 150 × 35available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 70 × 150 × 35mm
Cdynamic 236kN
C0static 228kN

Cylindrical roller NU bearing NU 314.

C, C₀: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 314 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet