+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NF 212 E: ⌀60 × ⌀110 × 22 mm⌀110⌀6022NF 212 E
Fig. 1: NF 212 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NF 212 E

Load: radial high; no axial loadCylindrical roller

Bearing CT NF 212 E

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 31 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
22 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
71.9 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 60 × 110 × 22 from other brands

36 products
Cross-section drawing to size: Cylindrical roller, 60 × 110 × 22 mm
You are viewingCT NF 212 E

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller, 60 × 110 × 22 mmNF 212 EThis bearingCT60 × 110 × 22available to orderon requestyou are here
  • Cross-section drawing to size: Cylindrical roller, 60 × 110 × 22 mmNF 212 ENTE60 × 110 × 22available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 110 × 22mm
Cdynamic 71.9kN

Cylindrical roller bearing NF 212 E.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 212 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet