+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NUP 314−E−M1: ⌀70 × ⌀150 × 35 mm⌀150⌀7035NUP 314−E−M1
Fig. 1: NUP 314−E−M1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 314-E-M1

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing FAG NUP 314-E-M1

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 43 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
35 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 70 × 150 × 35 from other brands

46 products
Cross-section drawing to size: Cylindrical roller NUP, 70 × 150 × 35 mm
You are viewingFAG NUP 314-E-M1

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): NU 314 ENU 314 EECT70 × 150 × 3598 pcs€11.56Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 70 × 150 × 35 mmNJ 314different designCT70 × 150 × 3526 pcs€13.25Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU314EME, MCT70 × 150 × 3520 pcs€14.82Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 70 × 150 × 35 mmNJ314J PQJ, PQ: not decodedNTE70 × 150 × 3510 pcs€20.72Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU314J PQJ, PQ: not decodedNTE70 × 150 × 356 pcs€20.72Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 70 × 150 × 35 mmN 314different designCT70 × 150 × 35available to order€12.79Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 150 × 35 mmNU 314different designCT70 × 150 × 35available to order€12.90Request a quote
  • Photo: NU 314NU 314different designURB70 × 150 × 35available to order€34.92Request a quote
  • Photo: NU 314NU 314different designZKL70 × 150 × 35available to order€47.27Request a quote
  • Photo: NU 314NU 314different designFLT70 × 150 × 35available to order€52.54Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 70 × 150 × 35mm

Cylindrical roller NUP bearing NUP 314−E−M1.

Frequently asked questions

Will 314 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet