Veles
VelesKnife rollers · Veles
Crushing roller HIT 3, 2.9 m
2.90 mworking width
from 92 hpdraft requirement
1,300 kgweight
Veles Agro crushing rollers chop crop residue, level and firm the field surface in one pass.
MoreModel: Crushing roller HIT 3, 2.9 m
Manufacturer: Veles
Class: machinery
Type: knife rollers
Copy: 1 / 1
//About the machine
Crushingroller HIT 3, 2.9 m
Descr.
Veles Agro crushing rollers chop crop residue, level and firm the field surface in one pass. The range has the trailed HIT 6 with a 6.2 m working width and an 860 mm roller, and the mounted HIT 3 at 2.90 m wide with a 300 mm twin knife roller. The load of the HIT 6 is adjusted by filling the cylinders with water, from 6,500 to 8,000 kg, with a working speed of up to 20 km/h. The HIT 3 cuts plant residue with six knives in a staggered pattern and weighs 1,300 kg.
Doc · Agrodiler · machinery Veles · 2026 11 specs
//Technical specifications
data sheet#ParameterValue
- |Model
- Crushing roller HIT 3, 2.9 m
- |BWorking width, m
- 2.90 Working width BThe strip the machine works in one pass.
- |Transport width, m
- 2.99
- |Transport height, m
- 1.21
- |Length with rear linkage, m
- 2.10
- |Length with front linkage, m
- 1.09
- |vWorking speed, km/h
- up to 20 Working speed vThe speed the machine works at in the field.
- |mWeight, kg
- 1,300 Weight mWeight of the machine without the tractor.
- |Draft requirement, hp
- from 92
01
04
05
06
07
08
09
10
11
Manufacturer and Agrodiler catalogue data 11 reg.OK