Foundry Plant
Foundry PlantKnife rollers · Foundry Plant
KR water-ballast crushing roller
The KR water-ballast crushing roller breaks maize and sunflower stalks right after harvest and presses them to the ground, partly mulching the field. The knives are of 65G steel, either cutting or chopping, and weight is adjusted with water in the drum. Hydraulic models from 6 to 12.5 m.
MoreModel: Water-ballast cutting crushing roller hydraulic KR-6P-01
Manufacturer: Foundry Plant
Class: machinery
Type: knife rollers
Copy: 1 / 1
//About the machine
Water-ballastcutting crushing roller hydraulic KR-6P-01
The KR water-ballast crushing roller breaks maize and sunflower stalks right after harvest and presses them to the ground, partly mulching the field. The knives are of 65G steel, either cutting or chopping, and weight is adjusted with water in the drum. Hydraulic models from 6 to 12.5 m.
Choose the modelprice, configuration and options are for the selected
Below are the options and parts for the selected model. The model range table compares every model and also switches the selection.
//Technical specifications
data sheet- |Model
- Water-ballast cutting crushing roller hydraulic KR-6P-01
- |BWorking width, mm
- 6,000 Working width BThe strip the machine works in one pass.
- |Work rate, ha/h
- 4.8–7.2
- |Working speed, km/h
- 12
- |Transport speed, km/h
- 20
- |Roller with knives, mm
- Ø460 (steel 65G)
- |Shaft diameter, mm
- 60
- |mWeight (without water), kg
- 1,770 Weight mWeight of the machine without the tractor.
- |Weight (with water), kg
- 1,890
- |NTractor power (min.), hp
- 80 Tractor power NPower of the tractor that pulls the machine at working speed.
- |Dimensions, working position (L × W × H), mm
- 3,580 × 6,240 × 1,025
- |Working tools
- cutting: cylinder Ø 219/Ø 470, knives in staggered pattern