+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6224 2Z · 120 × 215 × 40

Deep groove ball · 6224 2Z

radial — mediumaxial — low, on both sides
    Drawing of 6224 2Z: ⌀120 × ⌀215 × 40 mm6224 2Z2Z
    Fig. 1: 6224 2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6224 2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing ZVL 6224 2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 8 approximate
    d
    120 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    215 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    40 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 120 × 215 × 40 from other brands

    9 products
    Series illustration (not a photo of this item): 6224 2Z
    You are viewingZVL 6224 2Z

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 62246224open, no protectionCT120 × 215 × 4011 pcs€19.59
    • Series illustration (not a photo of this item): 62246224open, no protectionNTE120 × 215 × 408 pcs€32.77
    • Series illustration (not a photo of this item): 62246224open, no protectionno brand120 × 215 × 40available to orderon request
    • Series illustration (not a photo of this item): 62246224open, no protectionDYZV120 × 215 × 40available to orderon request
    • Drawing: 6224 M-C36224 M-C3open, no protection, clearance C3, MFAG120 × 215 × 40available to orderon request
    • Series illustration (not a photo of this item): 62246224open, no protectionKG120 × 215 × 40available to orderon request
    • Series illustration (not a photo of this item): 6224/C36224/C3open, no protection, clearance C3SKF120 × 215 × 40available to orderon request
    • Cross-section drawing to size: Deep groove ball, 120 × 215 × 40 mm6224 M/C3clearance C3, M: not decodedSKF120 × 215 × 40available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 215d 120B 40
    d×D×Bsize 120 × 215 × 40mm

    Deep groove ball bearing 6224-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80224.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80224?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0224 corresponds to the ISO base 6224. Size 120 × 215 × 40 mm, a full equivalent of 6224-ZZ.

    Will 6224 2Z C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet