+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €16.19 per piece.
6224 · 120 × 215 × 40

Deep groove ball · 6224

radial — mediumaxial — low, on both sides
    Drawing of 6224: ⌀120 × ⌀215 × 40 mm6224
    Fig. 1: 6224, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6224

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6224

    €19.59per piece incl. VAT
    In stock: 11 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 4 approximate
    d
    120 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    215 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    40 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    146 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    118 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    5.15 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 120 × 215 × 40 from other brands

    9 products
    Series illustration (not a photo of this item): 6224
    You are viewingCT 6224
    €19.59baseline for the price comparison

    Everything the number specifies matches: series 62, 120 × 215 × 40 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 62246224This bearingCT120 × 215 × 4011 pcs€19.59you are here
    • Series illustration (not a photo of this item): 62246224NTE120 × 215 × 408 pcs€32.77+€13.18
    • Series illustration (not a photo of this item): 62246224no brand120 × 215 × 40available to orderon request
    • Series illustration (not a photo of this item): 62246224DYZV120 × 215 × 40available to orderon request
    • Series illustration (not a photo of this item): 62246224KG120 × 215 × 40available to orderon request

    Under the price: the difference from the price of this bearing (€19.59).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 215d 120B 40
    d×D×Bsize 120 × 215 × 40mm
    Cdynamic 146kN
    C0static 118kN
    mweight 5.15kg

    Deep groove ball bearing 6224. Under GOST the same bearing is designated 224.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 224?

    It is the same bearing under GOST 3189-89: 224 corresponds to the ISO base 6224. Size 120 × 215 × 40 mm, a full equivalent of 6224.

    Will 6224 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet