+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2312 · 60 × 130 × 46

Self-aligning ball · 2312

radial — mediumaxial — low, on both sides
    Drawing of 2312: ⌀60 × ⌀130 × 46 mm⌀130⌀60462312
    Fig. 1: 2312, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2312

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing ZVL 2312

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    7 exact, 7 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    46 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 60 × 130 × 46 from other brands

    15 products
    Series illustration (not a photo of this item): 2312
    You are viewingZVL 2312

    Everything the number specifies matches: series 23, 60 × 130 × 46 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZVL catalogue.

    • Series illustration (not a photo of this item): 23122312This bearingZVL60 × 130 × 46available to orderon requestyou are here
    • Series illustration (not a photo of this item): 23122312CT60 × 130 × 4616 pcs€13.76
    • Photo: 23122312Z&S60 × 130 × 46available to order€37.21
    • Photo: 23122312GPZ60 × 130 × 46available to order€48.12
    • Photo: 23122312FLT60 × 130 × 46available to order€57.32
    • Photo: 23122312SKF60 × 130 × 46available to order€157.86
    • Series illustration (not a photo of this item): 23122312NTN60 × 130 × 46available to orderon request
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 46mm

    Self-aligning ball bearing 2312. Under GOST the same bearing is designated 1612.

    Frequently asked questions

    What is 1612?

    It is the same bearing under GOST 3189-89: 1612 corresponds to the ISO base 2312. Size 60 × 130 × 46 mm, a full equivalent of 2312.

    Will 2312 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet