+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €130.46 per piece.
2312 · 60 × 130 × 46

Self-aligning ball · 2312

radial — mediumaxial — low, on both sides
    Drawing of 2312: ⌀60 × ⌀130 × 46 mm⌀130⌀60462312
    Fig. 1: 2312, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2312

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2312

    €157.86per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    7 exact, 7 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    46 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    87.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
    C0
    28.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
    01

    Equivalents

    the same size 60 × 130 × 46 from other brands

    15 products
    Photo: 2312
    You are viewingSKF 2312
    €157.86baseline for the price comparison

    Everything the number specifies matches: series 23, 60 × 130 × 46 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 23122312This bearingSKF60 × 130 × 46available to order€157.86you are here
    • Series illustration (not a photo of this item): 23122312CT60 × 130 × 4616 pcs€13.76−€144.10
    • Photo: 23122312Z&S60 × 130 × 46available to order€37.21−€120.65
    • Photo: 23122312GPZ60 × 130 × 46available to order€48.12−€109.74
    • Photo: 23122312FLT60 × 130 × 46available to order€57.32−€100.54
    • Series illustration (not a photo of this item): 23122312NTN60 × 130 × 46available to orderon request
    • Series illustration (not a photo of this item): 23122312ZVL60 × 130 × 46available to orderon request

    Under the price: the difference from the price of this bearing (€157.86).
    02

    Often bought with this

    shaft snap ring Ø60

    1 product
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 130 × 46mm
    Cdynamic 87.1kN
    C0static 28.5kN

    Self-aligning ball bearing 2312. Under GOST the same bearing is designated 1612.

    C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1612?

    It is the same bearing under GOST 3189-89: 1612 corresponds to the ISO base 2312. Size 60 × 130 × 46 mm, a full equivalent of 2312.

    Will 2312 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet