+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €47.07 per piece.
2314 · 70 × 150 × 51

Self-aligning ball · 2314

radial — mediumaxial — low, on both sides
    Drawing of 2314: ⌀70 × ⌀150 × 51 mm⌀150⌀70512314
    Fig. 1: 2314, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2314

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing ZKL 2314

    €56.95per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 2 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    51 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    112 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    37.6 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 70 × 150 × 51 from other brands

    8 products
    Photo: 2314
    You are viewingZKL 2314
    €56.95baseline for the price comparison

    Everything the number specifies matches: series 23, 70 × 150 × 51 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZKL catalogue.

    • Photo: 23142314This bearingZKL70 × 150 × 51available to order€56.95you are here
    • Series illustration (not a photo of this item): 23142314CT70 × 150 × 5116 pcs€16.19−€40.76
    • Series illustration (not a photo of this item): 23142314GPZ70 × 150 × 51out of stockon request
    • Series illustration (not a photo of this item): 23142314KG70 × 150 × 51available to orderon request
    • Series illustration (not a photo of this item): 23142314SKF70 × 150 × 51available to orderon request

    Under the price: the difference from the price of this bearing (€56.95).
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 70 × 150 × 51mm
    Cdynamic 112kN
    C0static 37.6kN

    Self-aligning ball bearing 2314. Under GOST the same bearing is designated 1614.

    C, C₀: ZKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1614?

    It is the same bearing under GOST 3189-89: 1614 corresponds to the ISO base 2314. Size 70 × 150 × 51 mm, a full equivalent of 2314.

    Will 2314 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet