+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
GPZ
2314 · 70 × 150 × 51

Self-aligning ball · 2314

radial — mediumaxial — low, on both sides
    Drawing of 2314: ⌀70 × ⌀150 × 51 mm⌀150⌀70512314
    Fig. 1: 2314, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2314

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing GPZ 2314

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 2 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    51 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    4.52 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 70 × 150 × 51 from other brands

    8 products
    Series illustration (not a photo of this item): 2314
    You are viewingGPZ 2314

    Everything the number specifies matches: series 23, 70 × 150 × 51 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

    • Series illustration (not a photo of this item): 23142314This bearingGPZ70 × 150 × 51out of stockon requestyou are here
    • Series illustration (not a photo of this item): 23142314CT70 × 150 × 5116 pcs€16.19
    • Photo: 23142314ZKL70 × 150 × 51available to order€56.95
    • Series illustration (not a photo of this item): 23142314KG70 × 150 × 51available to orderon request
    • Series illustration (not a photo of this item): 23142314SKF70 × 150 × 51available to orderon request
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 70 × 150 × 51mm
    mweight 4.52kg

    Self-aligning ball bearing 2314. Under GOST the same bearing is designated 1614.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1614?

    It is the same bearing under GOST 3189-89: 1614 corresponds to the ISO base 2314. Size 70 × 150 × 51 mm, a full equivalent of 2314.

    Will 2314 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet