+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6204 2RS NR C3 · 20 × 47 × 14

Deep groove ball · 6204 2RS NR C3

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6204 2RS NR C3: ⌀20 × ⌀47 × 14 mm⌀47⌀20146204 2RS NR C32RS
    Fig. 1: 6204 2RS NR C3, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6204 2RS NR C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 6204 2RS NR C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 116 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    C3
    C
    13.75 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    6.55 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    18,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.11 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 20 × 47 × 14 from other brands

    117 products
    Photo: 6204 2RS NR C3
    You are viewingZ&S 6204 2RS NR C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6204 2RS6204 2RSnormal clearance, standard designCT20 × 47 × 1456,914 pcs€0.62
    • Series illustration (not a photo of this item): 6204 2RS C36204 2RS C3standard designCT20 × 47 × 142,240 pcs€0.69
    • Series illustration (not a photo of this item): 6204 2RS C46204 2RS C4clearance C4, standard designNTE20 × 47 × 14500 pcs€0.76
    • Series illustration (not a photo of this item): 6204 2RS6204 2RSnormal clearance, standard designNTE20 × 47 × 149,699 pcs€0.83
    • Series illustration (not a photo of this item): 6204 2RS C36204 2RS C3standard designNTE20 × 47 × 1431,380 pcs€0.83
    • Drawing: SS 6204-2RSSS 6204-2RSnormal clearance, stainless steelCT20 × 47 × 141,420 pcs€2.21
    • Series illustration (not a photo of this item): 6204 2NSE C36204 2NSE C3standard designNACHI20 × 47 × 1490 pcs€2.98
    • Series illustration (not a photo of this item): 6204 2NSE6204 2NSEnormal clearance, standard designNACHI20 × 47 × 1498 pcs€3.01
    • Photo: 6204 2RS C36204 2RS C3standard designTIMKEN20 × 47 × 14769 pcs€3.52
    • Photo: 6204 2RS C36204 2RS C3standard designKoyo20 × 47 × 14174 pcs€3.56
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø47, seal 20×47

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.293,920 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines4 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ same geometry 4 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has groove and snap ring (NR)

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo same geometry 4 assemblies

      ours has clearance C3; the machine takes normal (CN); ours has groove and snap ring (NR)

      manufacturer’s catalogue: maschio_primavera-2009

    3. VBP 2160 (baler) Kuhn same geometry 2 assemblies · 5 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has groove and snap ring (NR)

      manufacturer’s catalogue: kuhn_vbp-2160

    4. Belarus-152 Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has groove and snap ring (NR)

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 2 assemblies · 3 pcs per machine

      the machine has A; ours does not; the machine has S17; ours does not; ours has clearance C3; the machine takes normal (CN); ours is P0; the machine takes P6; ours has groove and snap ring (NR)

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 20B 14
    d×D×Bsize 20 × 47 × 14mm
    Cdynamic 13.75kN
    C0static 6.55kN
    mweight 0.11kg

    Deep groove ball bearing 6204-2RS C3, design 2RS: contact seals on both sides.

    C, C₀, m and limiting speed 18,000 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet