+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.57 per piece.
6204 2RS C3 · 20 × 47 × 14

Deep groove ball · 6204 2RS C3

radial — mediumaxial — low, on both sides
    Drawing of 6204 2RS C3: ⌀20 × ⌀47 × 14 mm6204 2RS C32RS
    Fig. 1: 6204 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6204 2RS C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6204 2RS C3

    €0.69per piece incl. VAT
    In stock: 2,240 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    9 exact, 105 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    C3
    C
    13.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    6.55 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.11 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 20 × 47 × 14 from other brands

    117 products
    Series illustration (not a photo of this item): 6204 2RS C3
    You are viewingCT 6204 2RS C3
    €0.69baseline for the price comparison

    Everything the number specifies matches: series 62, 20 × 47 × 14 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6204 2RS C36204 2RS C3This bearingCT20 × 47 × 142,240 pcs€0.69you are here
    • Series illustration (not a photo of this item): 6204 2RS C36204 2RS C3NTE20 × 47 × 1431,380 pcs€0.83+€0.14
    • Series illustration (not a photo of this item): 6204 2NSE C36204 2NSE C3NACHI20 × 47 × 1490 pcs€2.98+€2.29
    • Photo: 6204 2RS C36204 2RS C3TIMKEN20 × 47 × 14769 pcs€3.52+€2.83
    • Photo: 6204 2RS C36204 2RS C3Koyo20 × 47 × 14174 pcs€3.56+€2.87
    • Photo: 6204-2RSH/C36204-2RSH/C3SKF20 × 47 × 14available to order€3.92+€3.23
    • Series illustration (not a photo of this item): 6204 2RS C36204 2RS C3no brand20 × 47 × 14available to orderon request
    • Series illustration (not a photo of this item): 6204.2RSR.C36204.2RSR.C3FAG20 × 47 × 14available to orderon request
    • Series illustration (not a photo of this item): 6204 2RSC36204 2RSC3KG20 × 47 × 14available to orderon request

    Under the price: the difference from the price of this bearing (€0.69).
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø47, seal 20×47

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.293,920 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines4 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ same geometry 4 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo same geometry 4 assemblies

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: maschio_primavera-2009

    3. VBP 2160 (baler) Kuhn same geometry 2 assemblies · 5 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: kuhn_vbp-2160

    4. Belarus-152 Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 2 assemblies · 3 pcs per machine

      the machine has A; ours does not; the machine has S17; ours does not; ours has clearance C3; the machine takes normal (CN); ours is P0; the machine takes P6

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 20B 14
    d×D×Bsize 20 × 47 × 14mm
    Cdynamic 13.5kN
    C0static 6.55kN
    mweight 0.11kg

    Deep groove ball bearing 6204-2RS C3, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet