+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
UTL
NJ 313 · 65 × 140 × 33

Cylindrical roller · NJ 313

radial — highaxial — low, on one side
    Drawing of NJ 313: ⌀65 × ⌀140 × 33 mm⌀140⌀6533NJ 313
    Fig. 1: NJ 313, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 313

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing UTL NJ 313

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    OEM number
    65 RJ 03
    Equivalents
    7 exact, 28 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    33 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    2.3 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 65 × 140 × 33 from other brands

    38 products
    Series illustration (not a photo of this item): NJ 313
    You are viewingUTL NJ 313

    Size and design match across the brand catalogues. The codes in the number are read against the UTL catalogue.

    • Series illustration (not a photo of this item): NJ 313NJ 313This bearingUTL65 × 140 × 33out of stockon requestyou are here
    • Series illustration (not a photo of this item): NJ 313NJ 313CT65 × 140 × 336 pcs€12.51
    • Series illustration (not a photo of this item): NJ 313 MNJ 313 MCT65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): NJ 313NJ 313GPZ65 × 140 × 33out of stockon request
    • Series illustration (not a photo of this item): NJ 313 ENJ 313 EKG65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): NJ 313 ENJ 313 ENTE65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): NJ 313 ECJNJ 313 ECJSKF65 × 140 × 33available to orderon request
    02

    Often bought with this

    shaft snap ring Ø65

    2 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 140 × 33mm
    mweight 2.3kg

    Cylindrical roller NJ bearing NJ 313.

    M: UTL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 313 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet