+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €10.34 per piece.
NJ 313 · 65 × 140 × 33

Cylindrical roller · NJ 313

radial — highaxial — low, on one side
    Drawing of NJ 313: ⌀65 × ⌀140 × 33 mm⌀140⌀6533NJ 313
    Fig. 1: NJ 313, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 313

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ 313

    €12.51per piece incl. VAT
    In stock: 6 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    7 exact, 28 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    33 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    212 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    196 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 65 × 140 × 33 from other brands

    38 products
    Series illustration (not a photo of this item): NJ 313
    You are viewingCT NJ 313
    €12.51baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ 313NJ 313This bearingCT65 × 140 × 336 pcs€12.51you are here
    • Series illustration (not a photo of this item): NJ 313 MNJ 313 MCT65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): NJ 313NJ 313GPZ65 × 140 × 33out of stockon request
    • Series illustration (not a photo of this item): NJ 313 ENJ 313 EKG65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): NJ 313 ENJ 313 ENTE65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): NJ 313 ECJNJ 313 ECJSKF65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): NJ 313NJ 313UTL65 × 140 × 33out of stockon request

    Under the price: the difference from the price of this bearing (€12.51).
    02

    Often bought with this

    shaft snap ring Ø65

    2 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 140 × 33mm
    Cdynamic 212kN
    C0static 196kN

    Cylindrical roller NJ bearing NJ 313.

    C, C₀: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 313 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet