+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 2309 · 45 × 100 × 36

Cylindrical roller · NJ 2309

radial — highaxial — low, on one side
    Drawing of NJ 2309: ⌀45 × ⌀100 × 36 mm⌀100⌀4536NJ 2309
    Fig. 1: NJ 2309, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 2309

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing STEYR NJ 2309

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    OEM number
    45 RJ 23
    Equivalents
    4 exact, 11 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    36 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    1.33 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 100 × 36 from other brands

    15 products
    Series illustration (not a photo of this item): NJ 2309
    You are viewingSTEYR NJ 2309

    Size and design match across the brand catalogues. The codes in the number are read against the STEYR catalogue.

    • Series illustration (not a photo of this item): NJ 2309NJ 2309This bearingSTEYR45 × 100 × 36out of stockon requestyou are here
    • Photo: NJ 2309 E1MNJ 2309 E1MNEU45 × 100 × 36available to order€56.41
    • Series illustration (not a photo of this item): NJ 2309 ENJ 2309 ECT45 × 100 × 36available to orderon request
    • Series illustration (not a photo of this item): NJ 2309 ECPNJ 2309 ECPSKF45 × 100 × 36available to orderon request
    02

    Often bought with this

    seal 45×100, shaft snap ring Ø45, bore snap ring Ø100

    3 products
    • Seal 45×100JULU 045-100-10 TCWhy it fits: Oil seal 45×100: shaft 45 and housing bore 100, the same as the bearing
      €0.93available to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 45 × 100 × 36mm
    mweight 1.33kg

    Cylindrical roller NJ bearing NJ 2309.

    M: STEYR data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2309 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet