+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 2309 E · 45 × 100 × 36

Cylindrical roller · NJ 2309 E

radial — highaxial — low, on one side
    Drawing of NJ 2309 E: ⌀45 × ⌀100 × 36 mm⌀100⌀4536NJ 2309 E
    Fig. 1: NJ 2309 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 2309 E

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ 2309 E

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 13 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    36 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    160 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 45 × 100 × 36 from other brands

    15 products
    Series illustration (not a photo of this item): NJ 2309 E
    You are viewingCT NJ 2309 E

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 2309NU 2309different designCT45 × 100 × 368 pcs€8.46
    • Photo: NUP 2309 ENUP 2309 Edifferent designZ&S45 × 100 × 36available to order€18.86
    • Photo: NJ 2309 E1MNJ 2309 E1ME1, MNEU45 × 100 × 36available to order€56.41
    • Photo: NU 2309 ETVP2 C3NU 2309 ETVP2 C3clearance C3, E, TVP2FAG45 × 100 × 36available to order€74.66
    • Series illustration (not a photo of this item): NU2309-E-XL-TVP2NU2309-E-XL-TVP2E, TVP2, XLFAG45 × 100 × 36available to orderon request
    • Series illustration (not a photo of this item): NU2309ET *5NU2309ET *55, E, TNSK45 × 100 × 36available to orderon request
    • Series illustration (not a photo of this item): NJ 2309 ECML/C3NJ 2309 ECML/C3clearance C3, reinforced design EC, MLSKF45 × 100 × 36available to orderon request
    • Series illustration (not a photo of this item): NJ 2309 ECPNJ 2309 ECPreinforced design EC, PSKF45 × 100 × 36available to orderon request
    • Series illustration (not a photo of this item): NJ2309 ECP/C3NJ2309 ECP/C3clearance C3, reinforced design EC, PSKF45 × 100 × 36available to orderon request
    • Series illustration (not a photo of this item): NU 2309 ECPNU 2309 ECPreinforced design EC, PSKF45 × 100 × 36available to orderon request
    02

    Often bought with this

    seal 45×100, shaft snap ring Ø45, bore snap ring Ø100

    3 products
    • Seal 45×100JULU 045-100-10 TCWhy it fits: Oil seal 45×100: shaft 45 and housing bore 100, the same as the bearing
      €0.93available to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 45 × 100 × 36mm
    Cdynamic 160kN

    Cylindrical roller NJ bearing NJ 2309 E.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2309 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet