NU 313 ECP · 65 × 140 × 33

Cylindrical roller · NU 313 ECP

radial — high

    Drawing of NU 313 ECP: ⌀65 × ⌀140 × 33 mm⌀140⌀6533NU 313 ECP
    Fig. 1: NU 313 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 313 ECP

    Load: radial high; no axial loadCylindrical roller NU

    Bearing SKF NU 313 ECP

    Price on request
    Available to order

    Specifications

    Manufacturer number
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    33 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    212 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 65 × 140 × 33 from other brands

    38 products
    Series illustration (not a photo of this item): NU 313 ECP
    You are viewingSKF NU 313 ECP

    Same size, different design: the difference is written in the row.

    • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mmN 313 single boxdifferent designCT65 × 140 × 33200 pcs€10.84
    • Series illustration (not a photo of this item): N 313N 313different designCT65 × 140 × 33250 pcs€11.57
    • Series illustration (not a photo of this item): NJ 313NJ 313different designCT65 × 140 × 336 pcs€12.51
    • Series illustration (not a photo of this item): N313J PQN313J PQJ, PQ: not decodedNTE65 × 140 × 3320 pcs€22.09
    • Series illustration (not a photo of this item): NJ313J PQNJ313J PQJ, PQ: not decodedNTE65 × 140 × 3310 pcs€22.09
    • Series illustration (not a photo of this item): NU313J PQNU313J PQJ, PQ: not decodedNTE65 × 140 × 3312 pcs€22.09
    • Photo: NUP 313 E C4NUP 313 E C4clearance C4, EZ&S65 × 140 × 33available to order€24.45
    • Series illustration (not a photo of this item): NF 313NF 313different designCT65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): NJ 313 MNJ 313 MMCT65 × 140 × 33available to orderon request
    • Series illustration (not a photo of this item): NU313 EMC3NANU313 EMC3NAclearance NA, ECT65 × 140 × 33available to orderon request
    02

    Often bought with this

    shaft snap ring Ø65

    2 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 140 × 33mm
    Cdynamic 212kN

    Cylindrical roller NU bearing NU 313 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 313 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet