+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 222 ECJ · 110 × 200 × 38

Cylindrical roller · NU 222 ECJ

radial — high
    Drawing of NU 222 ECJ: ⌀110 × ⌀200 × 38 mm⌀200⌀11038NU 222 ECJ
    Fig. 1: NU 222 ECJ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 222 ECJ

    Load: radial high; no axial loadCylindrical roller NU

    Bearing SKF NU 222 ECJ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 16 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    200 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    38 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    335 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 110 × 200 × 38 from other brands

    20 products
    Series illustration (not a photo of this item): NU 222 ECJ
    You are viewingSKF NU 222 ECJ

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): N 222N 222different designCT110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): N 222 E-XL-M1N 222 E-XL-M1E, M1, XLFAG110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NU 222 E-XL-M1-C3NU 222 E-XL-M1-C3clearance C3, E, M1, XLFAG110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NU 222 EM1NU 222 EM1E, M1FAG110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NUP 222 ECPNUP 222 ECPEC, PNIS110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NU222ENU222EENTE110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): N 222 ECPN 222 ECPreinforced design EC, PSKF110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NJ 222 ECJNJ 222 ECJdifferent designSKF110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NJ 222 ECMNJ 222 ECMreinforced design EC, different cageSKF110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NU 222 ECMNU 222 ECMreinforced design EC, different cageSKF110 × 200 × 38available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 110 × 200 × 38mm
    Cdynamic 335kN

    Cylindrical roller NU bearing NU 222 ECJ.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 222 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet