+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
N 222-E-XL-M1 · 110 × 200 × 38

Cylindrical roller · N 222 E-XL-M1

radial — high
    Drawing of N 222 E-XL-M1: ⌀110 × ⌀200 × 38 mm⌀200⌀11038N 222 E-XL-M1
    Fig. 1: N 222 E-XL-M1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of N 222-E-XL-M1

    Load: radial high; no axial loadCylindrical roller N

    Bearing FAG N 222-E-XL-M1

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 18 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    200 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    38 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 110 × 200 × 38 from other brands

    20 products
    Series illustration (not a photo of this item): N 222 E-XL-M1
    You are viewingFAG N 222-E-XL-M1

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU222NU222different designCT110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NU 222 EM1NU 222 EM1E, M1FAG110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NU 222NU 222different designKoyo110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NUP 222 ECPNUP 222 ECPEC, PNIS110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NU222ENU222EENTE110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): N 222 ECPN 222 ECPreinforced design EC, PSKF110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NJ 222 ECJNJ 222 ECJreinforced design EC, pressed steel cageSKF110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NJ 222 ECMNJ 222 ECMreinforced design EC, different cageSKF110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NU 222 ECJNU 222 ECJreinforced design EC, pressed steel cageSKF110 × 200 × 38available to orderon request
    • Series illustration (not a photo of this item): NU 222 ECJ/C3NU 222 ECJ/C3clearance C3, reinforced design EC, pressed steel cageSKF110 × 200 × 38available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 110 × 200 × 38mm

    Cylindrical roller N bearing N 222 E-XL-M1.

    Frequently asked questions

    Will 222 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet