+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 2218 ECP · 90 × 160 × 40

Cylindrical roller · NU 2218 ECP

radial — high
    Drawing of NU 2218 ECP: ⌀90 × ⌀160 × 40 mm⌀160⌀9040NU 2218 ECP
    Fig. 1: NU 2218 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 2218 ECP

    Load: radial high; no axial loadCylindrical roller NU

    Bearing SKF NU 2218 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 9 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    40 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    280 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 90 × 160 × 40 from other brands

    11 products
    Series illustration (not a photo of this item): NU 2218 ECP
    You are viewingSKF NU 2218 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NUP2218 EMC4NANUP2218 EMC4NAclearance NA, ECT90 × 160 × 4070 pcs€25.47
    • Cross-section drawing to size: Cylindrical roller NU, 90 × 160 × 40 mmNU2218 EMC4NA (radial clearance 105...125)clearance CE, C, EA, E, groove for a snap ring, RADIAL, L, RA, 105, 125: not decodedCT90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2218 E M1NU 2218 E M1E, M1FAG90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2218 E TVP2NU 2218 E TVP2E, TVP2FAG90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU2218-E-XL-M1-C3NU2218-E-XL-M1-C3clearance C3, E, M1, XLFAG90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NUP 2218 E XL M1NUP 2218 E XL M1E, M1, XLFAG90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NJ 2218 ECMNJ 2218 ECMreinforced design EC, different cageSKF90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2218 ECJ/C3NU 2218 ECJ/C3clearance C3, reinforced design EC, pressed steel cageSKF90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2218 ECP/C3NU 2218 ECP/C3clearance C3SKF90 × 160 × 40available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 40mm
    Cdynamic 280kN

    Cylindrical roller NU bearing NU 2218 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2218 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet