+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NUP 2218-E-XL-M1 · 90 × 160 × 40

Cylindrical roller · NUP 2218 E XL M1

radial — highaxial — low, on both sides
    Drawing of NUP 2218 E XL M1: ⌀90 × ⌀160 × 40 mm⌀160⌀9040NUP 2218 E XL M1
    Fig. 1: NUP 2218 E XL M1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NUP 2218-E-XL-M1

    Load: radial high; axial low, on both sidesCylindrical roller NUP

    Bearing FAG NUP 2218-E-XL-M1

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 10 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    40 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 90 × 160 × 40 from other brands

    11 products
    Series illustration (not a photo of this item): NUP 2218 E XL M1
    You are viewingFAG NUP 2218-E-XL-M1

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NUP2218 EMC4NANUP2218 EMC4NAclearance NA, ECT90 × 160 × 4070 pcs€25.47
    • Series illustration (not a photo of this item): NU2218NU2218different designCT90 × 160 × 40available to orderon request
    • Cross-section drawing to size: Cylindrical roller NU, 90 × 160 × 40 mmNU2218 EMC4NA (radial clearance 105...125)clearance CE, C, EA, E, groove for a snap ring, RADIAL, L, RA, 105, 125: not decodedCT90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2218 E M1NU 2218 E M1E, M1FAG90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2218 E TVP2NU 2218 E TVP2E, TVP2FAG90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NJ 2218 ECMNJ 2218 ECMreinforced design EC, different cageSKF90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2218 ECJ/C3NU 2218 ECJ/C3clearance C3, reinforced design EC, pressed steel cageSKF90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2218 ECPNU 2218 ECPreinforced design EC, PSKF90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2218 ECP/C3NU 2218 ECP/C3clearance C3, reinforced design EC, PSKF90 × 160 × 40available to orderon request
    • Series illustration (not a photo of this item): NU2218-E-XL-M1-C3NU2218-E-XL-M1-C3clearance C3FAG90 × 160 × 40available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 40mm

    Cylindrical roller NUP bearing NUP 2218 E XL M1.

    Frequently asked questions

    Will 2218 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet