+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 216 ECP · 80 × 140 × 26

Cylindrical roller · NU 216 ECP

radial — high
    Drawing of NU 216 ECP: ⌀80 × ⌀140 × 26 mm⌀140⌀8026NU 216 ECP
    Fig. 1: NU 216 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 216 ECP

    Load: radial high; no axial loadCylindrical roller NU

    Bearing SKF NU 216 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 17 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    26 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    160 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 80 × 140 × 26 from other brands

    19 products
    Series illustration (not a photo of this item): NU 216 ECP
    You are viewingSKF NU 216 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ 216NJ 216different designCT80 × 140 × 2650 pcs€10.22
    • Series illustration (not a photo of this item): NU216J PQNU216J PQJ, PQ: not decodedNTE80 × 140 × 2610 pcs€18.76
    • Photo: NJ 216 ENJ 216 EEZ&S80 × 140 × 26available to order€24.54
    • Series illustration (not a photo of this item): N 216 E M1 C3N 216 E M1 C3clearance C3, E, M1FAG80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): N 216-E-XL-M1N 216-E-XL-M1E, M1, XLFAG80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): NJ 216 E-XL-M1-C3NJ 216 E-XL-M1-C3clearance C3, E, M1, XLFAG80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): NU 216 E M1 C3NU 216 E M1 C3clearance C3, E, M1FAG80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): NJ 216NJ 216different designno brand80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): NJ 216NJ 216different designNSK80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): NU216ET *5NU216ET *55, E, TNSK80 × 140 × 26available to orderon request
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 140 × 26mm
    Cdynamic 160kN

    Cylindrical roller NU bearing NU 216 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 216 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet