+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €8.45 per piece.
NJ 216 · 80 × 140 × 26

Cylindrical roller · NJ 216

radial — highaxial — low, on one side
    Drawing of NJ 216: ⌀80 × ⌀140 × 26 mm⌀140⌀8026NJ 216
    Fig. 1: NJ 216, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 216

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ 216

    €10.22per piece incl. VAT
    In stock: 50 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    7 exact, 12 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    26 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    160 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    166 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.6 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 140 × 26 from other brands

    19 products
    Series illustration (not a photo of this item): NJ 216
    You are viewingCT NJ 216
    €10.22baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ 216NJ 216This bearingCT80 × 140 × 2650 pcs€10.22you are here
    • Photo: NJ 216 ENJ 216 EZ&S80 × 140 × 26available to order€24.54+€14.32
    • Series illustration (not a photo of this item): NJ 216NJ 216no brand80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): NJ 216NJ 216NSK80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): NJ216ENJ216ENTE80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): NJ 216 ECMNJ 216 ECMSKF80 × 140 × 26available to orderon request
    • Series illustration (not a photo of this item): NJ 216 ECPNJ 216 ECPSKF80 × 140 × 26available to orderon request

    Under the price: the difference from the price of this bearing (€10.22).
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 140 × 26mm
    Cdynamic 160kN
    C0static 166kN
    mweight 1.6kg

    Cylindrical roller NJ bearing NJ 216.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 216 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet