+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 214 ECP · 70 × 125 × 24

Cylindrical roller · NU 214 ECP

radial — high
    Drawing of NU 214 ECP: ⌀70 × ⌀125 × 24 mm⌀125⌀7024NU 214 ECP
    Fig. 1: NU 214 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 214 ECP

    Load: radial high; no axial loadCylindrical roller NU

    Bearing SKF NU 214 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 13 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    24 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    137 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 70 × 125 × 24 from other brands

    14 products
    Series illustration (not a photo of this item): NU 214 ECP
    You are viewingSKF NU 214 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ214J PQNJ214J PQJ, PQ: not decodedNTE70 × 125 × 2425 pcs€16.08
    • Series illustration (not a photo of this item): NUP 214 ENUP 214 EEZVL70 × 125 × 245 pcs€26.78
    • Photo: NJ 214 ENJ 214 EEZ&S70 × 125 × 24available to order€22.57
    • Series illustration (not a photo of this item): NJ214NJ214different designCT70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): NJ 214 E TVP2 C3NJ 214 E TVP2 C3clearance C3, E, TVP2FAG70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): NJ 214 E-XL-TVP2NJ 214 E-XL-TVP2E, TVP2, XLFAG70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): NUP 214-E-XL-M1NUP 214-E-XL-M1E, M1, XLFAG70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): NJ 214 WNJ 214 WWNSK70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): NJ214ENJ214EENTE70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): NJ 214 ECPNJ 214 ECPdifferent designSKF70 × 125 × 24available to orderon request
    02

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 70 × 125 × 24mm
    Cdynamic 137kN

    Cylindrical roller NU bearing NU 214 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 214 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet