+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ214 · 70 × 125 × 24

Cylindrical roller · NJ214

radial — highaxial — low, on one side
    Drawing of NJ214: ⌀70 × ⌀125 × 24 mm⌀125⌀7024NJ214
    Fig. 1: NJ214, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ214

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ214

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    6 exact, 7 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    24 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    137 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    137 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 70 × 125 × 24 from other brands

    14 products
    Series illustration (not a photo of this item): NJ214
    You are viewingCT NJ214

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ214NJ214This bearingCT70 × 125 × 24available to orderon requestyou are here
    • Photo: NJ 214 ENJ 214 EZ&S70 × 125 × 24available to order€22.57
    • Series illustration (not a photo of this item): NJ 214 E-XL-TVP2NJ 214 E-XL-TVP2FAG70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): NJ 214 WNJ 214 WNSK70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): NJ214ENJ214ENTE70 × 125 × 24available to orderon request
    • Series illustration (not a photo of this item): NJ 214 ECPNJ 214 ECPSKF70 × 125 × 24available to orderon request
    02

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 70 × 125 × 24mm
    Cdynamic 137kN
    C0static 137kN

    Cylindrical roller NJ bearing NJ214.

    C, C₀: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 214 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet