+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6206 MAC4S0 · 30 × 62 × 16

Deep groove ball · 6206 MAC4S0

radial — mediumaxial — low, on both sides
    Drawing of 6206 MAC4S0: ⌀30 × ⌀62 × 16 mm6206 MAC4S0
    Fig. 1: 6206 MAC4S0, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6206 MAC4S0

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6206 MAC4S0

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 89 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C4
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    90 products
    Drawing: 6206 MAC4S0
    You are viewingSKF 6206 MAC4S0

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6206 2RS6206 2RScontact seals on both sides, normal clearance, standard designCT30 × 62 × 1610,167 pcs€1.05
    • Series illustration (not a photo of this item): 6206 2RS C36206 2RS C3contact seals on both sides, clearance C3, standard designCT30 × 62 × 1680 pcs€1.11
    • Series illustration (not a photo of this item): 6206 2RSC36206 2RSC3contact seals on both sides, clearance C3, standard designNTE30 × 62 × 163,307 pcs€1.44
    • Series illustration (not a photo of this item): 6206 2RS6206 2RScontact seals on both sides, normal clearance, standard designNTE30 × 62 × 165,683 pcs€1.51
    • Drawing: SS 6206 2RSSS 6206 2RScontact seals on both sides, normal clearance, stainless steelCT30 × 62 × 16237 pcs€4.21
    • Series illustration (not a photo of this item): 6206 2NSE C36206 2NSE C3contact seals on both sides, clearance C3, standard designNACHI30 × 62 × 1642 pcs€4.63
    • Series illustration (not a photo of this item): 6206 2RS6206 2RScontact seals on both sides, normal clearance, standard designKoyo30 × 62 × 16349 pcs€5.55
    • Drawing: 6206 LLUC3/5K6206 LLUC3/5Kcontact seals on both sides, clearance C3, 5KNTN30 × 62 × 1637 pcs€6.63
    • Type diagram, no dimensions: ball6206 LLUCM/5Kcontact seals on both sides, 5K, CM: not decodedNTN30 × 62 × ?40 pcs€6.63
    • Series illustration (not a photo of this item): 6206 2NSE NR6206 2NSE NRcontact seals on both sides, normal clearance, groove and snap ringNACHI30 × 62 × 1648 pcs€7.01
    02

    Often bought with this

    seal 30×62, shaft snap ring Ø30, bore snap ring Ø62

    5 products
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.401,764 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn same geometry 3 assemblies · 11 pcs per machine

      ours: open; in the machine: seals on both sides (2RS); ours has clearance C4; the machine takes normal (CN); ours has MA, S0

      manufacturer’s catalogue: kuhn_vbp-2160

    2. Belarus-152 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C4; the machine takes normal (CN); ours has MA, S0

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    3. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 3 pcs per machine

      the machine has A; ours does not; ours has clearance C4; the machine takes normal (CN); ours has MA, S0

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    4. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C4; the machine takes normal (CN); ours has MA, S0

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C4; the machine takes normal (CN); ours has MA, S0

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 30B 16
    d×D×Bsize 30 × 62 × 16mm

    Deep groove ball bearing 6206 C4.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet