+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €5.48 per piece.
6206 LLUC3/5K · 30 × 62 × 16

Deep groove ball · 6206 LLUC3/5K

radial — mediumaxial — low, on both sides
    Drawing of 6206 LLUC3/5K: ⌀30 × ⌀62 × 16 mm6206 LLUC3/5KLLU
    Fig. 1: 6206 LLUC3/5K, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6206 LLUC3/5K

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTN 6206 LLUC3/5K

    €6.63per piece incl. VAT
    In stock: 37 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 88 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    LLUcontact seals on both sides
    Clearance
    C3
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    90 products
    Drawing: 6206 LLUC3/5K
    You are viewingNTN 6206 LLUC3/5K
    €6.63baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6206 2RS6206 2RSnormal clearance, standard designCT30 × 62 × 1610,167 pcs€1.05−€5.58
    • Series illustration (not a photo of this item): 6206 2RS C36206 2RS C3standard designCT30 × 62 × 1680 pcs€1.11−€5.52
    • Series illustration (not a photo of this item): 6206 2RSC36206 2RSC3standard designNTE30 × 62 × 163,307 pcs€1.44−€5.19
    • Series illustration (not a photo of this item): 6206 2RS6206 2RSnormal clearance, standard designNTE30 × 62 × 165,683 pcs€1.51−€5.12
    • Drawing: SS 6206 2RSSS 6206 2RSnormal clearance, stainless steelCT30 × 62 × 16237 pcs€4.21−€2.42
    • Series illustration (not a photo of this item): 6206 2NSE C36206 2NSE C3standard designNACHI30 × 62 × 1642 pcs€4.63−€2
    • Series illustration (not a photo of this item): 6206 2RS6206 2RSnormal clearance, standard designKoyo30 × 62 × 16349 pcs€5.55−€1.08
    • Type diagram, no dimensions: ball6206 LLUCM/5KCM: not decodedNTN30 × 62 × ?40 pcs€6.63same price
    • Series illustration (not a photo of this item): 6206 2NSE NR6206 2NSE NRnormal clearance, groove and snap ringNACHI30 × 62 × 1648 pcs€7.01+€0.38
    • Photo: 6206 2RS6206 2RSnormal clearance, standard designKLT30 × 62 × 16available to order€0.93−€5.70

    Under the price: the difference from the price of this bearing (€6.63).
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø62, seal 30×62

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (LLU), and the oil seal closes the unit from outside
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (LLU), and the oil seal closes the unit from outside
      €0.401,764 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn same geometry 3 assemblies · 11 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has 5K

      manufacturer’s catalogue: kuhn_vbp-2160

    2. Belarus-152 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has 5K

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    3. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 3 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has 5K

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    4. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has 5K

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has 5K

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 30B 16
    d×D×Bsize 30 × 62 × 16mm

    Deep groove ball bearing 6206-2RS C3, design LLU: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet