+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6206-2RS1/C4 · 30 × 62 × 16

Deep groove ball · 6206-2RS1/C4

radial — mediumaxial — low, on both sides
    Drawing of 6206-2RS1/C4: ⌀30 × ⌀62 × 16 mm6206-2RS1/C42RS1
    Fig. 1: 6206-2RS1/C4, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6206-2RS1/C4

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6206-2RS1/C4

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 89 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    C4
    C
    20.3 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    90 products
    Series illustration (not a photo of this item): 6206-2RS1/C4
    You are viewingSKF 6206-2RS1/C4

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6206 ZZ C36206 ZZ C3metal shields on both sides, clearance C3CT30 × 62 × 1661 pcs€1.04
    • Series illustration (not a photo of this item): 6206 ZZ6206 ZZmetal shields on both sides, normal clearanceKoyo30 × 62 × 1639 pcs€4.92
    • Series illustration (not a photo of this item): 6206 ZZC36206 ZZC3metal shields on both sides, clearance C3Koyo30 × 62 × 1630 pcs€4.92
    • Photo: 6206-2Z/C36206-2Z/C3metal shields on both sides, clearance C3SKF30 × 62 × 16113 pcs€5.51
    • Series illustration (not a photo of this item): 6206-2Z6206-2Zmetal shields on both sides, normal clearanceSKF30 × 62 × 16275 pcs€5.54
    • Cross-section drawing to size: Deep groove ball, 30 × 62 × 16 mm6206 Zshield on one side, normal clearanceCT30 × 62 × 16available to order€0.97
    • Series illustration (not a photo of this item): 6206 ZZ6206 ZZmetal shields on both sides, normal clearanceCT30 × 62 × 16available to order€1.04
    • Series illustration (not a photo of this item): 6206 ZZ6206 ZZmetal shields on both sides, normal clearanceNTE30 × 62 × 16available to order€1.51
    • Photo: 6206 ZZ P66206 ZZ P6metal shields on both sides, normal clearance, precision class P6Z&S30 × 62 × 16available to order€2.43
    • Series illustration (not a photo of this item): 6206 ZZ6206 ZZmetal shields on both sides, normal clearanceno brand30 × 62 × 16available to orderon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø62, seal 30×62

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.401,764 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn same geometry 3 assemblies · 11 pcs per machine

      ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: kuhn_vbp-2160

    2. Belarus-152 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    3. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 3 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    4. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has clearance C4; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 30B 16
    d×D×Bsize 30 × 62 × 16mm
    Cdynamic 20.3kN

    Deep groove ball bearing 6206-2RS C4, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet