+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.80 per piece.
6206 Z · 30 × 62 × 16

Deep groove ball · 6206 Z

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6206 Z: ⌀30 × ⌀62 × 16 mm⌀62⌀30166206 ZZ
    Fig. 1: 6206 Z, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6206 Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6206 Z

    €0.97per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 88 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    Zshield, one side
    Clearance
    normal clearance
    C
    20.3 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    11.2 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.2 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    91 products
    Cross-section drawing to size: Deep groove ball, 30 × 62 × 16 mm
    You are viewingCT 6206 Z
    €0.97baseline for the price comparison

    Everything the number specifies matches: series 62, 30 × 62 × 16 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Cross-section drawing to size: Deep groove ball, 30 × 62 × 16 mm6206 ZThis bearingCT30 × 62 × 16available to order€0.97you are here
    • Cross-section drawing to size: Deep groove ball, 30 × 62 × 16 mm6206 ZKG30 × 62 × 16available to orderon request

    Under the price: the difference from the price of this bearing (€0.97).
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø62, seal 30×62

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.401,764 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines4 makesby parts catalogues

    1. T-150-05-09-25, KhTZ-181 KhTZ exactly this number 1 assembly · 2 pcs per machine

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    2. VBP 2160 (baler) Kuhn same geometry 3 assemblies · 11 pcs per machine

      ours: shield on one side; in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: kuhn_vbp-2160

    3. Belarus-152 Belarus same geometry 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: shield on one side; in the machine: open

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    4. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 3 pcs per machine

      the machine has A; ours does not; ours: shield on one side; in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    5. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours: shield on one side; in the machine: open

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (60206) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 30B 16
    d×D×Bsize 30 × 62 × 16mm
    Cdynamic 20.3kN
    C0static 11.2kN
    mweight 0.2kg

    Deep groove ball bearing 6206-Z, design Z: shield on one side. Under GOST the same bearing is designated 60206.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 60206?

    It is the same bearing under GOST 3189-89: 6 — shield on one side, 0206 corresponds to the ISO base 6206. Size 30 × 62 × 16 mm, a full equivalent of 6206-Z.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet