+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6204-2Z/C3WT · 20 × 47 × 14

Deep groove ball · 6204-2Z/C3WT

radial — mediumaxial — low, on both sides
    Drawing of 6204-2Z/C3WT: ⌀20 × ⌀47 × 14 mm6204-2Z/C3WT2Z
    Fig. 1: 6204-2Z/C3WT, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6204-2Z/C3WT

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6204-2Z/C3WT

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 115 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    14 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    C3
    C
    13.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 20 × 47 × 14 from other brands

    117 products
    Drawing: 6204-2Z/C3WT
    You are viewingSKF 6204-2Z/C3WT

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6204 2RS6204 2RScontact seals on both sides, normal clearance, standard designCT20 × 47 × 1456,914 pcs€0.62
    • Series illustration (not a photo of this item): 6204 2RS C36204 2RS C3contact seals on both sides, standard designCT20 × 47 × 142,240 pcs€0.69
    • Series illustration (not a photo of this item): 6204 2RS C46204 2RS C4contact seals on both sides, clearance C4, standard designNTE20 × 47 × 14500 pcs€0.76
    • Series illustration (not a photo of this item): 6204 2RS6204 2RScontact seals on both sides, normal clearance, standard designNTE20 × 47 × 149,699 pcs€0.83
    • Series illustration (not a photo of this item): 6204 2RS C36204 2RS C3contact seals on both sides, standard designNTE20 × 47 × 1431,380 pcs€0.83
    • Drawing: SS 6204-2RSSS 6204-2RScontact seals on both sides, normal clearance, stainless steelCT20 × 47 × 141,420 pcs€2.21
    • Series illustration (not a photo of this item): 6204 2NSE C36204 2NSE C3contact seals on both sides, standard designNACHI20 × 47 × 1490 pcs€2.98
    • Series illustration (not a photo of this item): 6204 2NSE6204 2NSEcontact seals on both sides, normal clearance, standard designNACHI20 × 47 × 1498 pcs€3.01
    • Photo: 6204 2RS C36204 2RS C3contact seals on both sides, standard designTIMKEN20 × 47 × 14769 pcs€3.52
    • Photo: 6204 2RS C36204 2RS C3contact seals on both sides, standard designKoyo20 × 47 × 14174 pcs€3.56
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø47, seal 20×47

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2Z), and the oil seal closes the unit from outside
      €0.293,920 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines4 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ same geometry 4 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo same geometry 4 assemblies

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: maschio_primavera-2009

    3. VBP 2160 (baler) Kuhn same geometry 2 assemblies · 5 pcs per machine

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: kuhn_vbp-2160

    4. Belarus-152 Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN); ours has WT

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 2 assemblies · 3 pcs per machine

      the machine has A; ours does not; the machine has S17; ours does not; ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN); ours is P0; the machine takes P6; ours has WT

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 20B 14
    d×D×Bsize 20 × 47 × 14mm
    Cdynamic 13.5kN

    Deep groove ball bearing 6204-ZZ C3, design 2Z: metal shields on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet