+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €51.56 per piece.
6020-2RS1/C3 · 100 × 150 × 24

Deep groove ball · 6020 2RS1/C3

radial — mediumaxial — low, on both sides
    Drawing of 6020 2RS1/C3: ⌀100 × ⌀150 × 24 mm6020 2RS1/C32RS1
    Fig. 1: 6020 2RS1/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6020-2RS1/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6020-2RS1/C3

    €62.39per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 15 approximate
    d
    100 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    24 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RS1contact seals on both sides
    Clearance
    C3
    C
    63.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 100 × 150 × 24 from other brands

    16 products
    Photo: 6020 2RS1/C3
    You are viewingSKF 6020-2RS1/C3
    €62.39baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6020 ZZ6020 ZZmetal shields on both sides, normal clearanceCT100 × 150 × 24available to order€8.13−€54.26
    • Series illustration (not a photo of this item): 6020 ZZ6020 ZZmetal shields on both sides, normal clearanceno brand100 × 150 × 24available to orderon request
    • Cross-section drawing to size: Deep groove ball, 100 × 150 × 24 mm6020 BHTS 2Z VT 280°metal shields on both sides, BHTS, VT: not decodedBECO100 × 150 × 24available to orderon request
    • Cross-section drawing to size: Deep groove ball, 100 × 150 × 24 mm6020 Zshield on one side, normal clearanceCT100 × 150 × 24available to orderon request
    • Series illustration (not a photo of this item): 6020 ZZ6020 ZZmetal shields on both sides, normal clearanceKG100 × 150 × 24available to orderon request
    • Series illustration (not a photo of this item): 6020-2Z6020-2Zmetal shields on both sides, normal clearanceSKF100 × 150 × 24available to orderon request
    • Series illustration (not a photo of this item): 60206020open, no protection, normal clearanceCT100 × 150 × 242 pcs€6.50−€55.89
    • Series illustration (not a photo of this item): 60206020open, no protection, normal clearanceno brand100 × 150 × 24available to orderon request
    • Series illustration (not a photo of this item): 60206020open, no protection, normal clearanceDYZV100 × 150 × 24available to orderon request
    • Series illustration (not a photo of this item): 60206020open, no protection, normal clearanceKG100 × 150 × 24available to orderon request

    Under the price: the difference from the price of this bearing (€62.39).
    02

    Often bought with this

    bore snap ring Ø150, seal 100×150

    3 products
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    • Seal 100×150JULU 100-150-12 TCWhy it fits: Oil seal 100×150: shaft 100 and housing bore 150, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    • Seal 100×150NEU 100x150x12Why it fits: Oil seal 100×150: shaft 100 and housing bore 150, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 1 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 150d 100B 24
    d×D×Bsize 100 × 150 × 24mm
    Cdynamic 63.7kN

    Deep groove ball bearing 6020-2RS C3, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet