+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6020 ZZ · 100 × 150 × 24

Deep groove ball · 6020 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6020 ZZ: ⌀100 × ⌀150 × 24 mm6020 ZZZZ
    Fig. 1: 6020 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6020 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 6020 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 12 approximate
    d
    100 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    24 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 100 × 150 × 24 from other brands

    16 products
    Series illustration (not a photo of this item): 6020 ZZ
    You are viewing6020 ZZ

    Everything the number specifies matches: series 60, 100 × 150 × 24 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 6020 ZZ6020 ZZThis bearingno brand100 × 150 × 24available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6020 ZZ6020 ZZCT100 × 150 × 24available to order€8.13
    • Series illustration (not a photo of this item): 6020 ZZ6020 ZZKG100 × 150 × 24available to orderon request
    • Series illustration (not a photo of this item): 6020-2Z6020-2ZSKF100 × 150 × 24available to orderon request
    02

    Often bought with this

    bore snap ring Ø150, seal 100×150

    3 products
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    • Seal 100×150JULU 100-150-12 TCWhy it fits: Oil seal 100×150: shaft 100 and housing bore 150, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    • Seal 100×150NEU 100x150x12Why it fits: Oil seal 100×150: shaft 100 and housing bore 150, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 1 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (80120) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 150d 100B 24
    d×D×Bsize 100 × 150 × 24mm

    Deep groove ball bearing 6020-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80120.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80120?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0120 corresponds to the ISO base 6020. Size 100 × 150 × 24 mm, a full equivalent of 6020-ZZ.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet