+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3310 A · 50 × 110 × 44.4

Angular contact ball · 3310 A

at an angle — medium, on both sides
    Drawing of 3310 A: ⌀50 × ⌀110 × 44.4 mm⌀110⌀5044.43310 A
    Fig. 1: 3310 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3310 A

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3310 A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 12 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    44.4 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    C
    90 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 50 × 110 × 44.4 from other brands

    13 products
    Series illustration (not a photo of this item): 3310 A
    You are viewingSKF 3310 A

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3310 2RS3310 2RScontact seals on both sides, standard designCT50 × 110 × 44.4135 pcs€18
    • Photo: 3310 2RS3310 2RScontact seals on both sides, standard designZ&S50 × 110 × 44.4available to order€39.63
    • Series illustration (not a photo of this item): 3310 2RS3310 2RScontact seals on both sides, standard designno brand50 × 110 × 44.4available to orderon request
    • Series illustration (not a photo of this item): 3310 BD 2HRS TVH3310 BD 2HRS TVHcontact seals on both sides, TVH, BD: not decodedFAG50 × 110 × ?available to orderon request
    • Series illustration (not a photo of this item): 3310 BD-XL-2HRS-TVH-C33310 BD-XL-2HRS-TVH-C3contact seals on both sides, clearance C3, TVH, XL, BD: not decodedFAG50 × 110 × ?available to orderon request
    • Type diagram, no dimensions: ball3310B-2RSRTNG N AR3N5contact seals on both sides, 5, A, B, TNG, groove for a snap ring, R3: not decodedNSK50 × 110 × ?available to orderon request
    • Series illustration (not a photo of this item): 3310 A-2RS1/C3MT333310 A-2RS1/C3MT33contact seals on both sides, clearance C3, A, MT33SKF50 × 110 × 44.4available to orderon request
    • Photo: 3310 B.TVH3310 B.TVHB, TVHNEU50 × 110 × 44.4available to order€99.56
    • Photo: 33103310standard designRIV50 × 110 × 44.4available to order€99.56
    • Series illustration (not a photo of this item): 3310 BD-XL-C33310 BD-XL-C3clearance C3, XL, BD: not decodedFAG50 × 110 × ?available to orderon request
    02

    Often bought with this

    seal 50×110, shaft snap ring Ø50, bore snap ring Ø110

    4 products
    • Seal 50×110JULU 050-110-10 TCWhy it fits: Oil seal 50×110: shaft 50 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 110d 50B 44.4
    d×D×Bsize 50 × 110 × 44.4mm
    Cdynamic 90kN

    Angular contact ball bearing 3310 A.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet