+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3310 2RS · 50 × 110 × 44.4

Angular contact ball · 3310 2RS

at an angle — medium, on both sides
    Drawing of 3310 2RS: ⌀50 × ⌀110 × 44.4 mm⌀110⌀5044.43310 2RS2RS
    Fig. 1: 3310 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3310 2RS

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing 3310 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 10 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    44.4 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    01

    Equivalents

    the same size 50 × 110 × 44.4 from other brands

    13 products
    Series illustration (not a photo of this item): 3310 2RS
    You are viewing3310 2RS

    Everything the number specifies matches: series 33, 50 × 110 × 44.4 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle.

    • Series illustration (not a photo of this item): 3310 2RS3310 2RSThis bearingno brand50 × 110 × 44.4available to orderon requestyou are here
    • Series illustration (not a photo of this item): 3310 2RS3310 2RSCT50 × 110 × 44.4135 pcs€18
    • Photo: 3310 2RS3310 2RSZ&S50 × 110 × 44.4available to order€39.63
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø110, seal 50×110

    4 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    • Seal 50×110JULU 050-110-10 TCWhy it fits: Oil seal 50×110: shaft 50 and housing bore 110, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 110d 50B 44.4
    d×D×Bsize 50 × 110 × 44.4mm

    Angular contact ball bearing 3310-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet