+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3206 A · 30 × 62 × 23.8

Angular contact ball · 3206 A

at an angle — medium, on both sides
    Drawing of 3206 A: ⌀30 × ⌀62 × 23.8 mm⌀62⌀3023.83206 A
    Fig. 1: 3206 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3206 A

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3206 A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 36 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23.8 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    C
    30 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 30 × 62 × 23.8 from other brands

    38 products
    Series illustration (not a photo of this item): 3206 A
    You are viewingSKF 3206 A

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3206 2RS TNG3206 2RS TNGcontact seals on both sides, TNGCT30 × 62 × 23.82,684 pcs€2.27
    • Series illustration (not a photo of this item): 3206 2RS3206 2RScontact seals on both sides, standard designNTE30 × 62 × 23.856 pcs€4.79
    • Series illustration (not a photo of this item): 5206 2RS5206 2RScontact seals on both sides, standard designNTE30 × 62 × 23.832 pcs€5.18
    • Series illustration (not a photo of this item): SS 3206 2RSSS 3206 2RScontact seals on both sides, stainless steelCT30 × 62 × 23.83 pcs€10.84
    • Series illustration (not a photo of this item): 3206 2RS / 5206 2RS3206 2RS / 5206 2RScontact seals on both sides, standard designNACHI30 × 62 × 23.848 pcs€21.09
    • Series illustration (not a photo of this item): 5206 2RS5206 2RScontact seals on both sides, standard designKoyo30 × 62 × 23.822 pcs€25.34
    • Photo: 3206 A-2RS1TN9/C3MT333206 A-2RS1TN9/C3MT33contact seals on both sides, clearance C3, different cage, A, MT33SKF30 × 62 × 23.89 pcs€40.58
    • Series illustration (not a photo of this item): 3206 2RS3206 2RScontact seals on both sides, standard designCT30 × 62 × 23.8available to order€2.67
    • Photo: 3206 2RS C33206 2RS C3contact seals on both sides, clearance C3, standard designZ&S30 × 62 × 23.8available to order€2.67
    • Photo: 3206 2RS3206 2RScontact seals on both sides, standard designZ&S30 × 62 × 23.8out of stock€6.96
    02

    Often bought with this

    seal 30×62, shaft snap ring Ø30, bore snap ring Ø62

    5 products
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.401,764 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 30B 23.8
    d×D×Bsize 30 × 62 × 23.8mm
    Cdynamic 30kN

    Angular contact ball bearing 3206 A.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet