+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €4.28 per piece.
5206 2RS · 30 × 62 × 23.8

Deep groove ball · 5206 2RS

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 5206 2RS: ⌀30 × ⌀62 × 23.8 mm⌀62⌀3023.85206 2RS2RS
    Fig. 1: 5206 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 5206 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 5206 2RS

    €5.18per piece incl. VAT
    In stock: 32 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 33 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    23.8 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    28.6 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 30 × 62 × 23.8 from other brands

    38 products
    Series illustration (not a photo of this item): 5206 2RS
    You are viewingNTE 5206 2RS
    €5.18baseline for the price comparison

    Everything the number specifies matches: series 52, 30 × 62 × 23.8 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 5206 2RS5206 2RSThis bearingNTE30 × 62 × 23.832 pcs€5.18you are here
    • Series illustration (not a photo of this item): 5206 2RS5206 2RSKoyo30 × 62 × 23.822 pcs€25.34+€20.16
    • Series illustration (not a photo of this item): 5206 2RS5206 2RSCT30 × 62 × 23.8available to orderon request

    Under the price: the difference from the price of this bearing (€5.18).
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø62, seal 30×62

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.401,764 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 30B 23.8
    d×D×Bsize 30 × 62 × 23.8mm
    Cdynamic 28.6kN

    Deep groove ball bearing 5206-2RS, design 2RS: contact seals on both sides.

    C: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 5206 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet