+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
3201 A-2RS1TN9/MT33 · 12 × 32 × 15.9

Angular contact ball · 3201 A-2RS1TN9/MT33

at an angle — medium, on both sides
    Drawing of 3201 A-2RS1TN9/MT33: ⌀12 × ⌀32 × 15.9 mm⌀32⌀1215.93201 A-2RS1TN9/MT332RS1
    Fig. 1: 3201 A-2RS1TN9/MT33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3201 A-2RS1TN9/MT33

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing SKF 3201 A-2RS1TN9/MT33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 11 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    15.9 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    C
    10.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 12 × 32 × 15.9 from other brands

    12 products
    Series illustration (not a photo of this item): 3201 A-2RS1TN9/MT33
    You are viewingSKF 3201 A-2RS1TN9/MT33

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 3201 2RS3201 2RSstandard designCT12 × 32 × 15.9918 pcs€1.37
    • Series illustration (not a photo of this item): 3201 2RS3201 2RSstandard designNTE12 × 32 × 15.97 pcs€2.18
    • Series illustration (not a photo of this item): 3201 2RS TNG3201 2RS TNGTNGCT12 × 32 × 15.9available to orderon request
    • Series illustration (not a photo of this item): 3201 2RS3201 2RSstandard designKG12 × 32 × 15.9available to orderon request
    • Series illustration (not a photo of this item): 3201B-2RSRTNG3201B-2RSRTNGB, TNGNEUWEG12 × 32 × 15.9available to orderon request
    • Type diagram, no dimensions: ball3201B-2RSRTNG N YRLN55, B, TNG, Y, groove for a snap ring, RL: not decodedNSK12 × 32 × ?available to orderon request
    • Photo: 3201 2RS3201 2RSstandard designZ&S12 × 32 × 15.9out of stockon request
    • Series illustration (not a photo of this item): S 3201 B 2RSS 3201 B 2RSB, S: not decodedZEN12 × 32 × 15.9available to orderon request
    • Photo: 32013201open, no protection, standard designFAG12 × 32 × 15.9available to order€20.75
    • Series illustration (not a photo of this item): 3201 ATN93201 ATN9open, no protection, different cage, ASKF12 × 32 × 15.9available to orderon request
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø32, seal 12×32

    4 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    • Seal 12×32JULU 012-32-7 TCWhy it fits: Oil seal 12×32: shaft 12 and housing bore 32, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.211,410 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 12B 15.9
    d×D×Bsize 12 × 32 × 15.9mm
    Cdynamic 10.1kN

    Angular contact ball bearing 3201 A-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet