+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.13 per piece.
3201 2RS · 12 × 32 × 15.9

Angular contact ball · 3201 2RS

at an angle — medium, on both sides
    Drawing of 3201 2RS: ⌀12 × ⌀32 × 15.9 mm⌀32⌀1215.93201 2RS2RS
    Fig. 1: 3201 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3201 2RS

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing CT 3201 2RS

    €1.37per piece incl. VAT
    In stock: 918 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 8 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    15.9 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    C
    10.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    5.6 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.058 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 12 × 32 × 15.9 from other brands

    12 products
    Series illustration (not a photo of this item): 3201 2RS
    You are viewingCT 3201 2RS
    €1.37baseline for the price comparison

    Everything the number specifies matches: series 32, 12 × 32 × 15.9 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 3201 2RS3201 2RSThis bearingCT12 × 32 × 15.9918 pcs€1.37you are here
    • Series illustration (not a photo of this item): 3201 2RS3201 2RSNTE12 × 32 × 15.97 pcs€2.18+€0.81
    • Series illustration (not a photo of this item): 3201 2RS3201 2RSKG12 × 32 × 15.9available to orderon request
    • Photo: 3201 2RS3201 2RSZ&S12 × 32 × 15.9out of stockon request

    Under the price: the difference from the price of this bearing (€1.37).
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø32, seal 12×32

    4 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    • Seal 12×32JULU 012-32-7 TCWhy it fits: Oil seal 12×32: shaft 12 and housing bore 32, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.211,410 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 12B 15.9
    d×D×Bsize 12 × 32 × 15.9mm
    Cdynamic 10.1kN
    C0static 5.6kN
    mweight 0.058kg

    Angular contact ball bearing 3201-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet