+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22232 CC/W33 · 160 × 290 × 80

Spherical roller · 22232 CC/W33

radial — highaxial — medium, on both sides
    Drawing of 22232 CC/W33: ⌀160 × ⌀290 × 80 mm⌀290⌀1608022232 CC/W33
    Fig. 1: 22232 CC/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22232 CC/W33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing SKF 22232 CC/W33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 11 approximate
    d
    160 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    290 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    80 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    1,000 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 160 × 290 × 80 from other brands

    12 products
    Series illustration (not a photo of this item): 22232 CC/W33
    You are viewingSKF 22232 CC/W33

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22232 CA/W3322232 CA/W33CA, lubrication groove and holesCT160 × 290 × 8048 pcs€129.77
    • Series illustration (not a photo of this item): 22232 CW33 PQ22232 CW33 PQCW33, PQ: not decodedNTE160 × 290 × ?10 pcs€280.53
    • Series illustration (not a photo of this item): 22232 KMBW3322232 KMBW33MB, lubrication groove and holes, 1:12 tapered boreCT160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232MB/W3322232MB/W33MB, lubrication groove and holesDYZV160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 E1-XL22232 E1-XLE1, XLFAG160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 MBW3322232 MBW33MB, lubrication groove and holesKG160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 MBW33C322232 MBW33C3clearance C3, MB, lubrication groove and holesKG160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 ACKMBW3322232 ACKMBW33AC, MB, lubrication groove and holes, 1:12 tapered boreNTE160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 CW3322232 CW33CW33NTE160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 MBW33 PQ22232 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE160 × 290 × ?available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 160 × 290 × 80mm
    Cdynamic 1,000kN

    Spherical roller bearing 22232. Under GOST the same bearing is designated 3532.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 3532?

    It is the same bearing under GOST 3189-89: 3532 corresponds to the ISO base 22232. Size 160 × 290 × 80 mm, a full equivalent of 22232.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet