+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €107.25 per piece.
22232 CA/W33 · 160 × 290 × 80

Spherical roller · 22232 CA/W33

radial — highaxial — medium, on both sides
    Drawing of 22232 CA/W33: ⌀160 × ⌀290 × 80 mm⌀290⌀1608022232 CA/W33
    Fig. 1: 22232 CA/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22232 CA/W33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing CT 22232 CA/W33

    €129.77per piece incl. VAT
    In stock: 48 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 11 approximate
    d
    160 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    290 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    80 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    825 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 160 × 290 × 80 from other brands

    12 products
    Series illustration (not a photo of this item): 22232 CA/W33
    You are viewingCT 22232 CA/W33
    €129.77baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22232 CW33 PQ22232 CW33 PQCW33, PQ: not decodedNTE160 × 290 × ?10 pcs€280.53+€150.76
    • Series illustration (not a photo of this item): 22232 KMBW3322232 KMBW33MB, lubrication groove and holes, 1:12 tapered boreCT160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232MB/W3322232MB/W33MB, lubrication groove and holesDYZV160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 E1-XL22232 E1-XLE1, XLFAG160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 MBW3322232 MBW33MB, lubrication groove and holesKG160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 MBW33C322232 MBW33C3clearance C3, MB, lubrication groove and holesKG160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 ACKMBW3322232 ACKMBW33AC, MB, lubrication groove and holes, 1:12 tapered boreNTE160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 CW3322232 CW33CW33NTE160 × 290 × 80available to orderon request
    • Series illustration (not a photo of this item): 22232 MBW33 PQ22232 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE160 × 290 × ?available to orderon request
    • Series illustration (not a photo of this item): 22232 CC/W3322232 CC/W33lubrication groove and holes, pressed cageSKF160 × 290 × 80available to orderon request

    Under the price: the difference from the price of this bearing (€129.77).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 160 × 290 × 80mm
    Cdynamic 825kN

    Spherical roller bearing 22232. Under GOST the same bearing is designated 3532.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 3532?

    It is the same bearing under GOST 3189-89: 3532 corresponds to the ISO base 22232. Size 160 × 290 × 80 mm, a full equivalent of 22232.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet