+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22207 EK · 35 × 72 × 23

Spherical roller · 22207 EK

radial — highaxial — medium, on both sides
    Drawing of 22207 EK: ⌀35 × ⌀72 × 23 mm⌀72⌀352322207 EK
    Fig. 1: 22207 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22207 EK

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing SKF 22207 EK

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 17 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    86.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 35 × 72 × 23 from other brands

    18 products
    Series illustration (not a photo of this item): 22207 EK
    You are viewingSKF 22207 EK

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22207 C/W3322207 C/W33C, lubrication groove and holesCT35 × 72 × 23447 pcs€4.61
    • Series illustration (not a photo of this item): 22207 CA/W3322207 CA/W33CA, lubrication groove and holesCT35 × 72 × 23729 pcs€4.97
    • Series illustration (not a photo of this item): 22207 CW3322207 CW33CW33NTE35 × 72 × 2326 pcs€8.41
    • Series illustration (not a photo of this item): 22207 CAW3322207 CAW33CA, lubrication groove and holesNTE35 × 72 × 2318 pcs€8.92
    • Series illustration (not a photo of this item): 22207 CCW33 PQ22207 CCW33 PQCC, lubrication groove and holes, PQ: not decodedNTE35 × 72 × 23100 pcs€9.44
    • Photo: 22207 E/C322207 E/C3clearance C3, ESKF35 × 72 × 233 pcs€47.77
    • Photo: 22207 CC W3322207 CC W33C, lubrication groove and holesZ&S35 × 72 × 23available to order€15.49
    • Photo: 22207 CW33C322207 CW33C3clearance C3, CW33KG35 × 72 × 23available to order€16.84
    • Photo: 22207 EJW33C322207 EJW33C3clearance C3, E, lubrication groove and holes, J: not decodedTIMKEN35 × 72 × 23available to order€37.13
    • Photo: 22207 E22207 EESKF35 × 72 × 23available to order€48.16
    02

    Often bought with this

    adapter sleeve H307, lock nut M35×1.5, lock washer MB07, bore snap ring Ø72, seal 30×72

    8 products
    • Adapter sleeve H307CT H 307Why it fits: H307 for 22207 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 156)
      €1.4986 pcs
    • Adapter sleeve H307FAG H 307Why it fits: H307 for 22207 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 156)
      Price to be confirmedavailable to order
    • Lock nut M35×1.5KM 07Why it fits: KM07 is the nut for sleeve H307: thread M35×1.5
      €0.82available to order
    • Lock nut M35×1.5Z&S KM 7Why it fits: KM07 is the nut for sleeve H307: thread M35×1.5
      €0.98available to order
    • Lock washer MB07CT MB 07Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.106,655 pcs
    • Lock washer MB07NEU MB 7Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.17available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: sleeve shaft 30, housing bore for the bearing 72; SN/SNL housings have their own seals, so check against the housing
      €0.392,205 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 23mm
    Cdynamic 86.5kN

    Spherical roller bearing 22207 K.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet