+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €6.95 per piece.
22207 CW33 · 35 × 72 × 23

Spherical roller · 22207 CW33

radial — highaxial — medium, on both sides
    Drawing of 22207 CW33: ⌀35 × ⌀72 × 23 mm⌀72⌀352322207 CW33
    Fig. 1: 22207 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22207 CW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22207 CW33

    €8.41per piece incl. VAT
    In stock: 26 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 13 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    23 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.436 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 35 × 72 × 23 from other brands

    18 products
    Series illustration (not a photo of this item): 22207 CW33
    You are viewingNTE 22207 CW33
    €8.41baseline for the price comparison

    Everything the number specifies matches: series 222, 35 × 72 × 23 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22207 CW3322207 CW33This bearingNTE35 × 72 × 2326 pcs€8.41you are here
    • Series illustration (not a photo of this item): 22207 C/W3322207 C/W33CT35 × 72 × 23447 pcs€4.61−€3.80
    • Series illustration (not a photo of this item): 22207 CW3322207 CW33no brand35 × 72 × 23available to orderon request
    • Series illustration (not a photo of this item): 22207 CW3322207 CW33KG35 × 72 × 23available to orderon request
    • Series illustration (not a photo of this item): 22207 CW3322207 CW33URB35 × 72 × 23available to orderon request

    Under the price: the difference from the price of this bearing (€8.41).
    02

    Often bought with this

    seal 35×72, shaft snap ring Ø35, bore snap ring Ø72

    6 products
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.502,454 pcs
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 23mm
    mweight 0.436kg

    Spherical roller bearing 22207.

    M: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 22207 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet