+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2214 E-2RS1TN9 · 70 × 125 × 31

Self-aligning ball · 2214 E-2RS1TN9

radial — mediumaxial — low, on both sides
    Drawing of 2214 E-2RS1TN9: ⌀70 × ⌀125 × 31 mm⌀125⌀70312214 E-2RS1TN92RS1
    Fig. 1: 2214 E-2RS1TN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2214 E-2RS1TN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2214 E-2RS1TN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 2 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    35.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 70 × 125 × 31 from other brands

    3 products
    Series illustration (not a photo of this item): 2214 E-2RS1TN9
    You are viewingSKF 2214 E-2RS1TN9

    Same size, different design: the difference is written in the row.

    • Photo: 22142214open, no protection, standard designM.G.M.70 × 125 × 31available to order€24.89
    • Series illustration (not a photo of this item): 22142214open, no protection, standard designSKF70 × 125 × 31available to orderon request
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø125, seal 70×125

    3 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €0.8782 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 70 × 125 × 31mm
    Cdynamic 35.8kN

    Self-aligning ball bearing 2214-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet