+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €20.57 per piece.
M.G.M.
2214 · 70 × 125 × 31

Self-aligning ball · 2214

radial — mediumaxial — low, on both sides
    Drawing of 2214: ⌀70 × ⌀125 × 31 mm⌀125⌀70312214
    Fig. 1: 2214, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2214

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing MGM 2214

    €24.89per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 1 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    31 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    1.69 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 70 × 125 × 31 from other brands

    3 products
    Photo: 2214
    You are viewingM.G.M. 2214
    €24.89baseline for the price comparison

    Everything the number specifies matches: series 22, 70 × 125 × 31 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the M.G.M. catalogue.

    • Photo: 22142214This bearingM.G.M.70 × 125 × 31available to order€24.89you are here
    • Series illustration (not a photo of this item): 22142214SKF70 × 125 × 31available to orderon request

    Under the price: the difference from the price of this bearing (€24.89).
    02

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 70 × 125 × 31mm
    mweight 1.69kg

    Self-aligning ball bearing 2214.

    M: M.G.M. data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet